CLEBO 2200TでXFree86を使う

ハードウェア

こちら

/etc/X11/XF86Config-4

Mouse0がグライドポイント?でMouse1がUSBマウス。Deviceのドライバは sisではなくvesa。

Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Mouse1" "SendCoreEvents"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/local/"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TrueType/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/PEX/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "pex5"
	Load  "record"
	Load  "xie"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option      "XkbRules" "xfree86"
	Option      "XkbModel" "pc106"
	Option      "XkbLayout" "ja"
	Option      "XkbOptions" "ctrl:swapcaps"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/psm0"
EndSection

Section "InputDevice"
	Identifier  "Mouse1"
	Driver      "mouse"
#	Option	    "Protocol" "IntelliMouse"
	Option	    "Protocol" "auto"
#	Option	    "Device" "/dev/ums0"
	Option	    "Device" "/dev/sysmouse"
	Option      "ZAxisMapping"  "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "PciRetry"           	# [<bool>]
        #Option     "rgbbits"            	# <i>
        #Option     "NoAccel"            	# [<bool>]
        #Option     "TurboQueue"         	# [<bool>]
        #Option     "SetMClk"            	# <freq>
        #Option     "FastVram"           	# [<bool>]
        #Option     "ForceCRT2Type"      	# [<str>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "NoXvideo"           	# [<bool>]
        #Option     "Vesa"               	# [<bool>]
        #Option     "MaxXFBMem"          	# <i>
	Identifier  "Card0"
	Driver      "vesa"
	VendorName  "SiS"
	BoardName   "630"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 16
	SubSection "Display"
		Depth     1
	EndSubSection
	SubSection "Display"
		Depth     4
	EndSubSection
	SubSection "Display"
		Depth     8
	EndSubSection
	SubSection "Display"
		Depth     15
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes     "1024x768"
	EndSubSection
	SubSection "Display"
		Depth     24
	EndSubSection
EndSection

/etc/rc.conf

(PS/2とか)普通のマウスとUSBマウスを一緒に使うときはmousedを起動 させずに、usbdだけを起動させたほうがいいかもしれません。特にUSB マウスがホイールマウスのときはそうしないとホイールが有効にならな いようない気がしました。ということで以下が設定例です。

moused_enable="NO"
usbd_enable="YES"